| Disc rotates at 28-30 r.p.m Suitable operation for 220 volts , 50 cycles, A.C supply |
| Gear speed 30-33 r.p.m Suitable operation for 440 volt , 3 phase, 50 cycles, A.C supply |
| A slump cone open at both end with lifting handles and tamping rod of size 16mm dia and 600 mm long , rounded at one end . |
| The apparatus consists of a metallic frame bearing a freely mocable rod with a cap at top, one vicat mould , split type and glass base plate and one set of needles one each initial needle final needle and consistency plunger |
| The frequency of vibration per minute is 1200 +/- 400 vibration per minute .supplied complete with 7.06 cubr mould with loose base plate, a time switch 0-5 mins x 1 min and certificate of vibration from standard laboratary. |
| Cap in KN | 2000 |
| 2 Gauge | |
| Readable to in KN | 0-500x2.5 |
| 0-1000x5.0 | |
| 0-2000x10.0 | |
| Load frame type | Pillar |
| Pumping Unit | Ele/H Ele/H |
| Ram dia | 216 216 |
| Max clearance | |
| Between Platens | 330 330 |
| Platen Size | 225 225 |
| Elect. Motor H.P | 1 1 |
| Motor Gear - 120 r.p.m Suitable operation for 220 volts , 50 cycles, A.C supply |
| Cap in KN | 2000 |
| 2 Gauge | |
| Readable to in KN | 0-500x2.5 |
| 0-1000x5.0 | |
| 0-2000x10.0 | |
| Load frame type | Pillar |
| Pumping Unit | Ele/H Ele/H |
| Ram dia | 216 216 |
| Max clearance | |
| Between Platens | 330 330 |
| Platen Size | 225 225 |
| Elect. Motor H.P | 1 1 |
| two speed 140+5 r.p.m 285 +with planetery motion of approx 62 r.p.m respectively 230 v, 50 cycle, single phase , A.C supply |
| Chamber dimension 10.5 cm diameter x 40.5 cm height suitable for operation at 230 v , 50 Hz Single phase ,A.C supply |