The test rig consists of a temperature controlled air heater,pressure gauge, thermometer tube and mounting clip for test vessel which made of glass comprises a jacketed sample tube, match air inlet capillary, baffle plate and air outlet tube.Complete with circulating Bath, Density Balance and Thermometer.

The apparatus consists of an Archimedian type pump ie. glass tube pump body, S.S. pump, variable speed small motor, within an Aniline sample container with an integral light well, illuminated by a 6 V lamp. The whole assembly
is heated in small glass beaker bath controlled by energy regulator. Electrically operated stirrer is also provided.

The apparatus consists of U-tube assembly which is mounted in a glass bath which is heated electricallyand controlled by energy regulator. A small electric motor stirrer is provided for the bath.

The unit consists of a rust protected shield incorporating a asbestos support whose height can be adjusted by a front knob and toughened glass window. A solid state controlled heater heated the sample. A meter is provided to monitor heater input. A thermally insulated condenser assembly is also provided. Complete with flask, Receiver, thermometer.

The apparatus consists of a supporting framework constructed from square S.S. tubing which acts as manifolds for supplying air or suction and needle valves are incorporated in each circuit. Absorbers are supported on S.S. platform. At the rear of frame work, two scrubbers & three pressure regulators of the manometer types are fitted. But without purified air furnace.

The tester consists of P/M Test cum assembly heated by electric heater controlled by energy regulator. Complete with gas test jet, flexible shaft for Stirring by hand or motor.

The apparatus consists standard cup which is electrically heated and controlled by energy regulator. A flame test burner & a thermometer clips are also provided.

Either Universal or Furol tubes can be used in the viscometer. An electronic variac with an energy regulator control the temperature of the oil bath in which viscometer tube is fixed. Complete with chained cork, tube nut wrench,collection flask, orifices.

The apparatus consists mainly a double valve self sealing type bomb which has an automatic check valve for charging with oxygen and a needle release valve for controlling pressure. It has also low voltage electric connection system for firing the sample inside under oxygen pressure.Complete with water jacket motor stirrer system, thermometer holder and reading lens, oxygen connection system with pressure gauge, ignition wire, bomb stand etc.

The apparatus consists of Cast aluminium block heated by ring type element controlled by energy regulator. Pre-heating S.S. coils and the air manifold are solidly embedded in the block. Complete with 5-gooseneck air jet, air piping with thermo-well, pressure flow gauge, thermometer, glass beakers.
Operation on 220/230 volts A.C , Single Phase, 50 Cycles,furnished complete with five breakers.

The apparatus consists mainly thermostatically controlled 5 Test solid block bath. Complete with Coke bulb, Coke bulb filling Rack, Tongs, Syringe.

The tester consists of a cylinder into which a solid cylinder is inserted along with the sample. The whole assembly is rotated by electric motor pulley sets at a 165 rpm for a specified time.

The grease worker is powered by ¼ or ½ HP motor for single or dual unit, geared to operated at 60 stroke per min. A digital preset counter automatically stops the worker after required number. The gear-motor unit is mounted on a heavy base on which worker pots is fixed by dual pins & quick action clamp.

The micrometer consists of electrically heated by 500 watt immersion element controlled by energy regulator in a spun copper bath into which a heavily chrome plated oil cup with a precision jet assembly is fitted.Complete with ball valve, sprit level, cup, cover, and thermometer clip.